LDPE (low density polyethylene # LDPE) / LD608 / Yanshan Petrochemical transparent material description specification level, film, blow molding Use of the material applied to the softer areas of packaging film, food bags, lined bags, etc., can be directly used that do not require peeling rubber packing, can be used in the manufacture foamed article. Also suitable for small injection molding products and use as a masterbatch carrier Remarks precise process control to have excellent workability, good transparency and heat sealing, can be used for processing foam, injection molding and masterbatch carrier and other products . Extrusion processing temperature range 150-180 ℃ raw technical data Performance Project test conditions [state] method of test data Data unit Physical properties of melt flow rate of 190 ℃ / 2.16kg GB / T 3682-2000? 6.0 g / 10min density of 23 ℃ GB / T 1033-1986? 0.920 g / cm3 mechanical properties of tensile strength? GB / T 1040.2-2006? 9 MPa Elongation at break? GB / T 1040.2-2006? 500% Other cleanliness? GB / T 11115-1989 ? 0 / kg haze? 50μm GB / T 2410-1980? 7.2% fisheye? 0.3-2mm GB / T 11115-1989? 10 n / 1200cm2 stripes? ≥1cm GB / T 11115-1989? 0 cm / 20m2 opening of the? easy to tear?