LDPE (low density polyethylene # LDPE) / LDC-801YY / Malaysia rattan material description specification level coating, extrusion of the material use any substrate coating Remarks without slip agents and anti-blocking agent. Operating temperature 270 ℃ -340 ℃. Drawdown good performance, combined with good heat resistance and adhesion raw technical data Performance Project test conditions [state] method of test data units other performance oxygen permeable O2GTR ASTM D-3985 23 Basic properties of density 23 ℃ ASTM D- 1505 0.920 g / cm3 a melt flow rate of 190 ℃ / 2.16kg ASTM D-1238 7 g / 10min Thermal properties Vicat softening point ASTM D-1525 86 ℃ other properties neck fixed discharge amount of 50m / min, 295 ℃ (c ) 9 cm moisture vapor permeability MVTR @ 90% RH, 37.8 ℃, 25μ ASTM F-372 18.5 g / m2 / 24H