LDPE (low density polyethylene # LDPE) / NA207-66 / Taiwan polymeric material description specification level Use of the material for the film blowing 0.010-0.040mm thick PE film for packaging suit, bread, retail fruit and vegetables fish, meat, as well as groceries and other purposes Remarks melt index, after heating the melt extrusion, mobility, and processing the necessary back down, the drive motor load is light. Has a high lubricity and high resistance to viscosity, PE bag is easy to open, transparent and shiny body bags, can increase the commercial value of the packaging material. Can also be used for injection molding, Taiping looks beautiful, moderate rigidity, toughness, retaining the amount of cover and plastic tree trunks motorcycle helmet is a typical product. Raw technical data Performance Project test conditions [state] method of test data units Basic performance density ASTM D-1505 0.923 g / cm3 mechanical properties of tensile yield strength of the film DM / DT ASTM D-882 98/100 kg / cm2 ductility mold molding ASTM D-638 250% impact strength ASTM D-1709 90 G / 50F yield point tensile strength of the mold molding ASTM D-638 130 kg / cm2 ductility film DM / DT ASTM D-882 350/480% anti-breaking point tensile strength of the film DM / DT ASTM D-882 190/135 kg / cm2 tensile strength at break mold molding ASTM D-638 100 kg / cm2 Thermal properties Vicat softening point ASTM D-1525 100 ℃ Other Properties Hardness ASTM D-2240 53 ShoreD Gloss 60 ℃ ASTM D-523 100% spray ASTM D-1003 7.0% coefficient of friction ASTM D-1894 0.16 / 0.12 μS / μK low temperature brittleness resistance ASTM D-746 <-76 ℃ / F50 melting point ASTM D- 2117 109 ℃ Melt Index ASTM D-1238 8 g / 10min