PP (polypropylene # pleated plastic | soft) / K1013 / Secco material description specification level injection The material uses a variety of small injection molding, sheet, monofilament, filament, blending modification. Remarks excellent rigidity, heat resistance and processing flow. Can be widely used in injection molding, extrusion, and various blends. Raw technical data Performance Project test conditions [state] method of test data Data unit Physical properties of melt flow rate of 230 ℃ / 2.16kg ISO 1133 15 g / 10min Mechanical properties of tensile yield strength of 50mm / min ISO 527-2: 1993 35 MPa tensile stretch elongation at 50mm / min ISO 527-2: 1993 <100% tensile strength 50mm / min ISO 527-2: 1993 18 MPa flexural modulus of 2mm / min ISO 178: 2001 1500 MPa Charpy notched impact strength 23 ℃ ISO 179: 2000 2.1 kJ / m2 Rockwell hardness ISO 2039-2:? 1987 112 R-scall Thermal heat distortion temperature 0.45MPa ISO 75-2: 2004 92 ℃ Other Yellow Index ASTM E313-00 -11?? ?